Beamline Phone Number:
+44 (0) 1235 778418
Principal Beamline Scientist:
Dave Allan
Tel: +44 (0) 1235 778644
E-mail: [email protected]
Email: [email protected]
Tel: +44 (0)1235 4494052
If not assigned by beamline staff, check the white board at the back of the hutch (webcam-11) to see where the pucks have been placed in the Dewars.
In ISPyB, click on Assign Containers, from the list
Click on the current visit from the potential list
This will take you to the page where all available puck positions are shown.
Note positions 1-7 are in Dewar 1 and 8-14 are in Dewar 2.
The pucks are listed in the appropriate shipment and all shipments associated with the visit should be shown.
Click on the puck and drag it to the correct position in the Dewars. Click Ok to confirm the container assignment. If you mis-place a puck, just drag the puck to the correct place and click Ok to confirm its new position.
Pucks assigned in ISPyB:
In the GDA – click on the Samples tab. You may need to click on the Refresh button to update the list if the GDA was opened before the pucks were assigned to their locations.
Please Note: Pucks for any given visit will normally all be placed in one Dewar, but sometimes they will be split between the 2 Dewars. It is recommended to work through the pucks in one Dewar, unload the last sample (to force a gripper dry) and then work through the pucks in the other Dewar. Measures in place to ensure the robot doesn’t drive through the side of the Dewar when moving from one Dewar to the other, mean the robot briefly sits at the wait position and then re-soaks in the new Dewar if you go directly from one to the other – there is a higher risk of icing doing it this way.
Diamond Light Source is the UK's national synchrotron science facility, located at the Harwell Science and Innovation Campus in Oxfordshire.
Copyright © 2022 Diamond Light Source
Diamond Light Source Ltd
Diamond House
Harwell Science & Innovation Campus
Didcot
Oxfordshire
OX11 0DE
Diamond Light Source® and the Diamond logo are registered trademarks of Diamond Light Source Ltd
Registered in England and Wales at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom. Company number: 4375679. VAT number: 287 461 957. Economic Operators Registration and Identification (EORI) number: GB287461957003.